Video Output Switch - Z-BEN H.264 Manual Del Usuario

Pantalla gui controlada por el ratón
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 280
When the operator password is entered,
NOT allowed to access. The operator user level needs to be set in the main menu "SYSTEM"
To switch between these two user levels, click the current user level icon to switch to the key lock mode, and move
your mouse to show the password input keypad, and enter the password of the user level you want.

4.5 Video Output Switch

It's not allowed to have video output simultaneously on a CRT monitor (connected to MONITOR) and LCD monitor
(connected to VGA).
The default video output setting is "AUTO", meaning the DVR will automatically detect the video output source.
When VGA and MONITOR are both connected, the default monitor output is VGA.
To change the video output setting manually:
To force the video output via MONITOR, press the left key ◄ on the DVR front panel at DVR power-on.
To force the video output via VGA, press the right key ► on the DVR front panel at DVR power-on.
The setting is changed when you hear a short beep sound.
OR:
When the DVR is powered on and initialized, right-click to show the main menu, and select "ADVANCE CONFIG"
"DISPLAY"
"DISPLAY OUTPUT PATH".
Select "VGA" to switch to the connected LCD monitor, or "COMPOSITE" to switch to the connected CRT monitor.
The DVR will then reboot for the change to take effect.
CAMERA
DETECTION
ALERT
NETWORK
SNTP
DISPLAY
RECORD
REMOTE
DCCS
IVS
EXIT
will be shown on the status bar of the screen, and the main menu is
ADVANCE CONFIG
DE-INTERLACE
(For Selected Models Only)
SCREEN DWELL DURATION
VGA OUTPUT
DISPLAY COVERT
HDD DISPLAY MODE
DISPLAY OUTPUT PATH
ALPHA BLENDING
OFF
03
1024 X 768
ON
HDD SIZE
AUTO
200
13
BASIC OPERATION
"TOOLS".

Publicidad

Tabla de contenido
loading

Tabla de contenido