Z-BEN H.264 Manual Del Usuario página 32

5) RESET COUNT
Click "SUBMIT" to reset the flow counting number to 0 when the IVS mode is set to "FLOW COUNTING" and
activated.
6) VIRTUAL FENCE AREA
Click "SETUP" to draw the detection line for IVS, and set the detection direction from left to right, or right to
left. This area setting is the detection base for IVS MODE.
IVS APPLICATION
F L O W C O U N
F L O W C O U N
Step1: Go to "VIRTUAL FENCE AREA" to draw a detection line with your mouse, and decide the
detection direction by selecting "LEFT TO RIGHT" or "RIGHT TO LEFT".
Step2:Finish the IVS setting and return to the live view. The IVS icon "
Click it to show the flow counting panel as follows.
When anyone walks across the detection line, the system will determine his movement is in or out,
and add one count to the corresponding channel on the flow counting panel.
IN People coming from the opposite direction to the arrow mark.
People coming from the same direction as the arrow mark.
OUT
T I N G
T I N G
28
MAIN MENU
" will be shown on the status bar.