Safety Information - Fluke 914X Serie Manual Del Usuario

914X Field Metrology Wells

Safety Information

Symbol Description
Electric Shock
Fuse
PE Ground
Hot Surface (Burn Hazard)
Read the User's Guide (Important Information)
Off
On
Canadian Standards Association
C-TICK Australian EMC mark
The European Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/
EC) mark.
1.4 Safety Information
Field Metrology Wells are designed in accordance with IEC 61010-1, IEC 61010-2-010 and
CAN/CSA 22.2 No 61010.1-04. Use this instrument only as specified in this manual. Other-
wise, the protection provided by the instrument may be impaired. Refer to the safety informa-
tion in the Warnings and Cautions sections below.
The following definitions apply to the terms "Warning" and "Caution".
"Warning" identifies conditions and actions that may pose hazards to the user.
●
"Caution" identifies conditions and actions that may damage the instrument being used.
●
4