Craftsman 580.752300 Instrucciones De Uso página 20

AFTER EACHUSE
Water should not remain in the unit for long periods of time.
Sediments or minerals can deposit on pump parts and
"freeze" pump action. Follow these procedures after every
use:
1. Shut off engine, turn off water supply, point gun in a
safe direction, press red button and squeezetrigger to
relieve trapped pressure and let engine cool.
WARHJHG
The high pressure stream of water that this
equipment produces can cut through skin and its
_ nderlying tissues, leading to serious injury and
)ossible amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
. Keephigh pressurehoseconnected to pumpand spraygun
whilesystemis pressurized.
. ALWAYS pointspraygun in safedirection,pressred button
and squeeze spraygun triggerto release high pressure,every
time youstop engine.
2. Disconnect hose from spray gun and high pressure
outlet on pump. Drain water from hose, gun, and spray
tip extension. Use a rag to wipe off the hose.
3. Empty pump of all pumped liquids by pulling recoil
handle about 6 times. This should remove most liquid in
pump.
4. Coil high pressure hose on hook provided on handle.
5. Store unit in a clean, dry area.
6. If storing for more than 30 days see Long Term Storage
on next page.
WARHJHG
_ uel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or
death.
WHENSTORING FUELOREQUIPMENT WITH FUELIN TANK
. Storeawayfrom furnaces,stoves,water heaters, c lothes
dryers,or otherappliances that havepilot light or otherignition
sourcebecause theycanignitefuelvapors.
2O