Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Your JUN-AIR compressor is easy to operate. Observe the
instructions and you will get many years service from your
compressor.
•
Visually inspect unit for shipping damage, contact your
supplier immediately if you think the unit may have been
damaged.
•
Check that the performance of the compressor matches
the actual air consumption, please refer to Technical
specifications.
•
Check that the rating plate of the compressor corresponds
with the electrical voltage offered and check that fusing is
adequate.
Placing
Place the compressor in a dustfree, dry and cool, yet frostfree
room.
Sufficient cooling from the surroundings is important.
•
Ambient temperature: 0°C - 40°C, °F - 104°F
•
Relative humidity: Max 90%
Mount the two distance bolts (1) on the back of the cabinet to
ensure sufficient ventilation.
1
4
Installation
•
Mount the drain bottle () visibly outside the cabinet and
mount the hose at the back of the cabinet ( ).
•
Connect the cable at the back of the cabinet(5).
•
Plug the compressor into a standard outlet switch.
•
Connect equipment at the back of the cabinet (4).
•
The front wheels are delivered with brakes. Brake the wheels
before starting the compressor ().
1
5
Operating manual
GB
1
Publicidad
Tabla de contenido
