An innovative, patented [EP 1869973] hose connection block prevents accidental
water leaks when disconnecting from the filter.
TÜV/GS certified.
•
Fully fitted and ready to install
A wide range of accessories guarantee easy connection to almost any freshwater
or marine aquarium.
Parts and description
1 Hose connection block with water-stop
1 a Middle lever
2 Pump head
3 Pump head
3 Canister seal
4 Distributor plate for incoming water
5 Combi filter basket
6 Filter basket
7 Filter canister
8 Water outlet pipe (to aquarium) with screw fitting
9 Angle piece x 2
10 Extension piece x 2
11 Wide jet pipe
12 Spray bar (2 parts)
13 End cap for spray bar (pre-fitted)
14 Suction cup x 5
15 Short hose clip for suction cup x 5
16 Long hose clip for suction cup x 5
17 Suction pipe (from aquarium), telescopic, with screw fitting
18 Intake strainer
19 Hose ( 12/16 for CP e701 and e901, 16/22 for CP e1501)
F1 Pre-filter material: T-Profile foam , 10 ppi
F2 Water channelling and mechanical/biological filter material: ceramic rings
F3 Biological main filter material: JBL MicroMec high-capacity bio filter balls
F4 Biological main filter material: foam pad 20 ppi
F5 Mechanical / biological fine filter material: foam pad 30 ppi
*ppi: pores per inch; 1 inch = 2.54 cm
2a left lock lever
5a washer for Combi filter basket
7a Fastening clips
2b right lock lever
DE
UK
FR
NL
IT
DK
ES
HU
SE
CZ
PL
RU
19