Phonebook; At Command; Opp (Object Push Profile) - Seecode SHF 20 Manual De Instrucciones

ENGLISH

6 phonebook

6.1 phonebook transfer

6.1.1 AT command

6.1.2 OPP (Object Push Profile)

Phonebook contents from the mobile phone can be transferred
to the SeecodeWheel through AT command or OPP ( Object
Push Profile) .
Not all mobile phones supports above features.
To transfer the phonebook to the unit through AT command:
1. Connect the mobile phone with the SeecodeWheel.
2. Press
3. Scroll in the menu with
PHONEBOOK.
4. Press to enter phonebok transfer inquire.
5. Press to start or
While the contact transfer is in progress
shown blinking at the display.
After a successful transfer
display .
If you see no response in the display, your phone don`t
support the transfer through AT command. Please try the
transfer through OPP.
The unit supports single contact or group contacts transfer via
OPP function. For detail operating procedures, please refer to
your mobile phones user manual.
To transfer the phonebook to the unit through OPP :
1. Disconnect BT connection from SeecodeWheel setting.
2. Do the proper setting on the mobile phone for transfering the
contacts by Bluetooth from the mobile phone to the unit.
3. During the phonebook transfer
the display.
4. After successful transfer you will see "xxx records" . The
„xxx" is a number representing the number of correct
transferred numbers.
5. Connect the SeecodeWheel again to the mobile phone.
6. Access the phonebook of the unit to check if the numbers
have been transferred correctly.
15
and until you see
to cancel.
will be shown at the
will be shown in
will be