Description Of System - Parker SCPS01 Manual De Instrucciones

.

Description of System

The electronic pressure switch was designed to be used in mass-pro-
duced machines.
In order to reduce the complexity of installation, the pressure switch can
be programmed with customer-specific values before going into the se-
ries production. There is then no longer any need to make time-consum-
ing adjustments while the system is pressurized.
The pressure switch can be set by the facility manufacturer using a con-
figuration program. This prevents the switch from being manipulated by
unauthorized end users.
This pressure switch contains no moveable parts. All components which
come into contact with the substance are made from stainless steel. This
feature, combined with the welded, thin-layer pressure sensor, ensure
optimal compatibility with the substance. A cushioning mechanism can
be optionally integrated in the substance inlet. The stainless steel hous-
ing enables the switch to be used in extremely harsh environments.
The switches have been designed with EMC characteristics, shock re-
sistance and vibration resistance so that they can be used in a wide
variety of applications and with mobile machines.
They have e1 approval and are thus approved for used in public trans-
portation vehicles.
The switches feature a sturdy, compact design and long-term stability
– which makes them the best alternative to mechanical pressure switch-
es.
42