Parker SCPS01 Manual De Instrucciones página 58

Field / button
Firmware version
Serial number
Pressure range
Current pressure
Status of switch output 1 / 2
5 Click on the Disconnect button in order to disconnect the pressure
switch. After the connection to the pressure switch is terminated, the
button displays the text "Connect with PS".
If the Read PS automatically option is activated, then the con-
nection to the pressure switch is automatically established when
the program starts up. The current data from the pressure switch
soon appears in the Info box.
5
Function / description
Firmware version of the pressure switch
Serial number of the pressure switch
Allowed pressure range for the pres-
sure switch (specified in bar)
Currently applied pressure (specified in
bar) The info display is updated live.
Status of the corresponding switch
output (ON/OFF)
Note: Only for firmware versions 1.04r0
and higher: this is only the pressure
switch simulation mode for the switch-
ing status; the outputs are not actually
switched.