Resetting The Switch Outputs On The Pressure Switch To The Factory Defaults; Opening An Existing Configuration File - Parker SCPS01 Manual De Instrucciones

5.4 Resetting the switch outputs on the pressure switch to the
factory defaults
1 Establish a connection to the pressure switch.
2 In the Settings box, select the desired output on the pressure switch;
select from Output 1 or Output 2.
 In the Settings box, click on the Write factory defaults to output 1/2
button. The switch outputs have now been reset to the factory default
configuration.
5.5 Opening an existing configuration file
1 Click on the Open option in the File menu. The Open window is then
displayed.
The Open window
64