AmazonBasics B07WRBJBGD Manual Del Usuario página 5

For regular inspection, the following items shall be taken into
account:
• Check that the stiles/legs (uprights) are not bent, bowed, twisted,
dented, cracked, corroded or rotten.
• Check that the stiles/legs around the fixing points for other
components are in good condition.
• Check that fixings (usually rivets, screws or bolts) are not missing,
loose, or corroded.
• Check that rungs/steps are not missing, loose, excessively worn,
corroded or damaged.
• Check that the hinges between front and rear sections are not
damaged, loose or corroded.
• Check that the locking stays horizontal, back rails and corner braces
are not missing, bent, loose, corroded or damaged.
• Check that the rung hooks are not missing, damaged, loose or
corroded and engage properly on the; rungs.
• Check that guide brackets are not missing, damaged, loose or
corroded and engage properly on the mating stile.
• Check that stepstool feet / end caps are not missing, loose,
excessively worn, corroded or damaged.
• Check that the entire stepstool is free from contaminants (e.g. Dirt,
mud, paint, oil or grease).
• Check that locking catches (if fitted) are not damaged or corroded
and function correctly.
• Check that the platform (if fitted) has no missing parts or fixings and is
not damaged or corroded.
WARNING
If any of the above checks cannot be fully satisfied, you
should NOT use the stepstool.
Cleaning
• To clean the product, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers,
metal or sharp utensils to clean the product.
EN
5