Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
6
Maintenance
NOTICE
Proper stepstool maintenance ensures the safe condition
of the stepstool.
•
Hardware, fittings, and accessories should be checked frequently and
kept in proper working condition.
•
All bolts and rivets shall be in place and secure before using a
stepstool, and no stepstool should be used if any bolts or rivets are
missing or if the joints between the steps (or rungs) and the side rails
are not tight.
•
Stepstools with safety shoes or padded feet which are excessively
worn shall be taken out of service until repaired.
Transportation
•
Stepstools transported on road, street, and highway motor vehicles
shall be properly supported. Securing the stepstool will greatly reduce
damage due to road shock.
Storage
•
Store stepstool where protected from unsafe materials, impact, or
corrosion damage.
•
Store stepstool away from dampness and excessive heat.
•
Store stepstool where it cannot be damaged by vehicles, heavy
objects, or contaminants.
•
Store stepstool where it cannot cause a trip hazard or an obstruction.
•
Store stepstool where it is secured against unauthorized climbing
(e.g. by children)
•
Stepstools should be stored in or on racks designed to protect the
stepstool when it is not in use. These racks should have sufficient
supporting points to avoid sagging.
•
Materials shall not be placed on the stepstool while it is in storage.
Publicidad
Tabla de contenido
