kiwy Alia Manual De Instrucciones página 7

Before traveling, make sure that any item or luggage inside the vehicle
·
is securely xed; in the event of an accident, loose objects can affect
the occupants and cause them major injuries.
For safety reasons, when you are traveling with other passengers, it is
·
prudent to have the heaviest in the front seats, making sure that every
occupant of the vehicle also uses the car safety seat belt.
The child seat must always be xed on the vehicle seat, even when not
·
carrying children, to prevent its displacement, in the event of an ac-
cident, and possible injuries to the vehicle occupants.
During long journeys, it is necessary to make frequent stops to allow
·
the child to move about, freeing him/her from the belts and from any
sense of constriction.
· Before leaving, check again the correct tting of the child seat and of
the child inside.
· Always use the safest side of the road when boarding on or exiting the
child from the vehicle.
· The internal pad ( part D in Fig.2) must be removed when the child ex-
ceeds the weight of 13 kg. (Approx. 18 months ), as shown in Fig. 5a.
What not to do
WARNING !
This child car seat cannot be installed by using the 3-point vehicle
safety belt only. The Iso x connector must always be used, accor-
ding to the different installation methods, as described in this book-
let, depending by the child's weight.
Choose the correct installation method by the child's weight (Fig.4).
·
Never install this child car seat rearward facing.
·
Do not install this child seat on vehicle seats tted with frontal airbags;
·
the impact between this device and the child's body, in the event of an
accident, could be extremely dangerous for your child.
IMPORTANT: Vehicles of recent manufacture allow you to disable the
front airbag on the passenger side, to allow the installation of this type
of child seats. Do not proceed with installation until you have carefully
read the instruction manual of your vehicle.
4
· Do not place any kind of padding in the area of contact between the
child seat and the vehicle seat, in order not to jeopardize the stability
and proper positioning of the child seat.
Do not make any modi cations of any kind to the child seat ; any mo-
·
di cations not performed or authorized by the manufacturer would
void the validity of the homologation.
For the same reason, spare parts or accessories that are not supplied
·
directly by the manufacturer of the car seat itself cannot be used.
Never leave any child unattended in the vehicle, even for short time.
·
· The buckle of the seat is a primary component for safety; discourage
your child from playing with it.
Do not install or remove the child seat from the car with the child in-
·
side.
The fabric covers are an integral part of the product and must always
·
be present on the child seat; when they're worn out, replace them only
with other covers provided by the manufacturer.
The child seat cover cannot be made with materials different from the
·
original one; covers made by different materials could affect the safety
of the seat, in the event of an accident.
· Ensure that the child seat doesn't come in contact with acids, solvents
or any other type of corrosive substance.
Any child seat must always be replaced after an accident, even if a ve-
·
ry low speed.
An accident can cause structural damages, although not visible, which
can compromise the protective efficacy of the child seat in the event of
another accident ; For this reason, it is strongly recommended not to use
or purchase a second-hand child seat.
Parts
A. Seat
B. Base
C. Harness adjustment belt
D. Internal pad
E. Chest belt section guides ( left and right )
F. Lap belt section guides ( left and right )
G. Top Tether strap
5