Stryker 4100-000-000 Instrucciones De Uso página 7

EN
AO Small Drill (REF 4100-110-000)
Accepts Synthes tools such as drill bits, taps and
automatic screwdrivers with the appropriate snap-
lock shank.
AO Large Reamer (REF 4100-210-000)
Accepts Synthes tools such as drill bits, automatic
screwdrivers, and flexible reamers with the
appropriate snap-lock shank. Utilizes low speed
and high torque.
Right Angle Drive - AO Large Reamer
(REF 4100-310-000)
Accepts all Synthes tools with the appropriate
snap-lock shank.
Trinkle Drill (REF 4100-160-000)
Accepts tools such as drill bits and automatic
screwdrivers with standard Trinkle fitting.
To retain a bit or tool in accessories with a retaining collar:
1. Slide back the retaining collar.
2. Insert a bit or accessory.
3. Release retaining collar.
4. Twist bit/accessory to check for proper retention before running handpiece.
6
Hudson/Modified Trinkle Drill (REF 4100-135-000)
Accepts tools such as drill bits, and automatic
screwdrivers with Hudson or modified Trinkle fitting.
Hudson/Modified Trinkle Reamer
(REF 4100-235-000)
Accepts tools such as drill bits, automatic
screwdrivers and flexible reamers with a Hudson
or modified Trinkle fitting. Utilizes low speed and
high torque.
Right Angle Drive Modified Trinkle Reamer
(REF 4100-335-000)
Accepts tools with modified Trinkle fitting.
Trinkle Reamer (REF 4100-260-000)
Accepts tools such as drill bits, automatic
screwdrivers and flexible reamers with standard
Trinkle fitting. Utilizes low speed and high torque.
4100-005-700 Rev-N
www.stryker.com