Scope Of Delivery; Optional Accessories; Getting Started - Proceq GPR Live Guía De Inicio Rápido & Certificados Del Producto

Scope of Delivery

Proceq GPR Live
Carrying case
A
Proceq GPR Live probe
B
Wrist loop
C
Proceq Live Wi-Fi module
D
Battery complete
E
Power supply
F
Chalk
G
Proceq grid paper 60x60/5 cm
H
Proceq grid paper 60x60/10 cm
I
Quick start guide and
J
product certificates

Optional Accessories

Device tablet holder
K
Telescopic rod with
L
tablet holder
Proceq grid papers (set of 5)
60x60/5 cm
M
60x60/10 cm
N
24x24/2 inch
O
24x24/4 inch
P
4

Getting Started

Congratulations on your purchase of Proceq GPR
393 10 x00
Live. This instrument has been manufactured to
highest Swiss quality standards. For complete
instructions and safe handling information, watch
the tutorials in the Proceq GPR Live app or visit
www.proceq.com/downloads.
Step 1 Prepare the scan car
indicates that the battery is almost fully charged,
but the temperature limit has been exceeded. Wait
for the charging to continue or use the battery. Red
LED indicates that the temperature limit has been
exceeded (wait) or that the AA batteries have not been
inserted correctly (unplug, check and re-connect).
393 40 100
393 40 200
Connect the Proceq Live Wi-Fi module to the
393 20 001S
right USB port on the back of the probe. Turn on
393 20 002S
the instrument by pushing the silver button. The
instrument is now ready to be connected to the iOS
393 20 011S
device.
393 20 012S
Step 2
Step 3
Insert the battery into
the handle. Before
first use, fully charge
the battery using the
power supply provided
(2 hours). The LED is to begin QR code recognition, and then follow the
green when charging on-screen instructions. A "Successful Registration"
and switches off once message will appear. QR Code verification is only
finished. Orange LED required once for initial set-up. Subsequently,
proceed to the iOS Wi-Fi settings to connect to
the Proceq GPR network. The app will inform you
if new probe firmware becomes available. Perform
the upgrade by tapping on the "Probe" tile when the
probe is connected.
For detailed instructions on set-up, measuring and
handling, watch the tutorial videos by tapping on
the "Tutorials" tile on the app home screen.
Install the app
Install the Proceq GPR Live app from
the App Store on your compatible iOS
device. Create your account in the app
or on live2.proceq.com.
Probe verification and connection
Connect the iOS device to
the internet and launch the
Proceq GPR Live app. Sign
in with your account and
then tap on the "Probe" tile.
On the "Device Information"
screen, tap the "Scan" button