Multipick LockForce Manual página 4

Multipick-Service
®
UK
I Manual - Multipick LockForce
The Lockforce combines the functionality of the lock-puller "Bell" with that of the lock-
cracker in one tool and will allow users to cope with with a wide range of problematic
situations. Even cylinder locks with a steel shell can be broken off using the Lockfor-
ce. It does not matter if the cylinder is jutting out or leveling with the surface of the
door/escutcheon.
Included Components of the LockForce-Set:
• 1 pc. LockForce
• 1 pc. Adapter for the plug-pulling of round cylinders (32mm)
• 1 pc. Plug-Pulling-Ring for Euro-Profile Cylinder
• 1 pc. 5 mm Allen Key for exchanging adapters
• 1 pc. Universal Key „short"
• 1 pc. Torx-T20 T-Handle screwdriver
• 1 pc. 19 mm wrench
• 10 pcs. Zieh-Fix pull screws 4.2 mm
• 10 pcs. Zieh-Fix pull screws 4.8 mm
Option 1:
Jutting out lock cylinders can be broken
off, just as if using the lock cracker
In order to break off jutting out standard
Profile or Round Cylinders (cylinders must
at least jut out 5 mm) you must simply push
the appropriate adaptor of the Lockforce
around the cylinder. Moving the Lockfor-
ce left and right repeatedly will eventu-
ally break the center part of the cylinder.
Using the included Universal Key the lock
can now be opened (in the case of profile
cylinders). In order to open in the case of
a broken off round cylinder one must use a
screwdriver of average size and complete
circular movements trying to lift the plate
that is held in place by springs. If you want
to break a profile cylinder with a body made
of hardened steel it is also possible to fix
the cylinder inside the adaptor with the
two screws at the sides, thus reinforcing
the grip of the tool on the cylinder. It is ad-
visable to use a pull screw in these cases,
though! To achieve more leverage on the
cylinder it is possible to pull out the (red)
extension tube.