Information And Safety Instructions For The Responsible Body; Requirements For The Responsible Body; Safety Notes; Proper Use - Orbitalum 790 052 773 Traducción Del Manual De Instrucciones Original

ENGLISH

Information and safety instructions for the responsible body

2. INFORMATION AND SAFETY INSTRUcTIONS FOR
THE RESPONSIBLE BODY
2.1

Requirements for the responsible body

Workshop/outdoor/field application: The responsible body is responsible for safety in the danger zone around the
machine, and should allow only qualified personnel to enter the zone or operate the machine in the danger zone.
Employee safety: The operator has to observe the safety regulations described in this chapter as well as has to work safety-con-
sciously and with all prescribed safety equipment.
2.2

Safety notes

Warning: When using power tools, be sure to adhere to the following safety measures to prevent danger
of shock, injury and fire. Read all instructions and notes before using this electrical tool and keep the
notes on safety properly stored.
The Tungsten Grinder (called ESG Plus in this document) is state of the art. Any other use than that described in these instructions
can lead to injury to the user or other persons. In addition the device or other objects can be damaged.
Therefore:
• Always ensure that the device is in good working condition, and always comply with these notes on safety.
• Keep the complete documentation close by the device.
• All regulations generally valid for the prevention of accidents must be observed.
2.2.1

Proper use

• The ESG Plus is intended only to be used to process welding electrodes.
2.2.2

Safety regulations

• Only use the dimensions and materials quoted in these instructions. Other materials should only be used after consulting
Orbitalum Tools customer service department.
• Only use authentic Orbitalum Tools spare parts and materials.
• Check the ESG Plus daily for any externally visible damage or defects. Have any damage or defects repaired immediately.
• Work on the electrical equipment should only be carried out by a qualified electrician.
• Only operate the ESG Plus if the electrical protective devices function.
• The tapped holes at the ESG Plus must always be free of dust, clean if necessary.
• Pull out the power plug before carrying out repair and maintenance work.
22
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
ESG PLUS, ESG PLUS²
[REV. 20200117] OW_ESG_BA_790052773_00__INH-02_EN