Cutting Device; Electrode Holder; Clamping Collet; Wall/Table/Vice-Mounting Plate - Orbitalum 790 052 773 Traducción Del Manual De Instrucciones Original

ESG PLUS, ESG PLUS²
3.1.2

cutting device

To cut tungsten electrodes to fixed length.
For electrode diameters 1.0; 1.6, 2.0 and 2.4 mm (0.040"; 0.060"; 0.079" and 0.095").
Fixed cutting lengths: 12; 13; 15 and 17 mm selectable (0.470"; 0.500"; 0.600" and 0.670").
ARTIcLE
Cutting device
3.1.3

Electrode holder

With clamping collet for clamping range 1.0 - 3.2 mm (0.039" - 0.126"),
Code 790 052 481.
ARTIcLE
Electrode holder
3.1.4

clamping collet

For clamping the electrode into the holder. For easy grinding of smaller electrodes.
ARTIcLE
Clamping collet
3.1.5

Wall/table/vice-mounting plate

Incl. 2 cylinder head screws (Code 790 052 495).
ARTIcLE
Wall/table/vice-mounting plate
3.1.6

Protective cover

Easy to adapt on the ESG Plus head.
With integrated retainer for suction units.
For use on electrodes with thorium.
ARTIcLE
Protective cover for ESG Plus
Protective cover for ESG Plus²
[REV. 20200117] OW_ESG_BA_790052773_00__INH-02_EN
construction of the product
cLAMPING RANGE
1.0 - 3.2 mm (0.039" - 0.126")
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
ENGLISH
cODE
790 052 513
cODE
790 052 457
cODE
790 052 481
cODE
790 052 483
cODE
790 052 496
790 052 596
25