Dupla CO2 Armatur Pro Instrucciones De Uso página 5

1
5
Note: The CO ² Armatur Pro is equipped with an integrated reflux valve that protects the fitting against reflux water.
Technical data:
Gas type:
connection number:
Operating pressure:
Pressure gauge connection:
Valve spindle:
Illustrations are non-binding. Technical details are subject to change.
CO ² Solenoid Valve Pro
Recommended accessories: For semi-automatic or fully automatic control there is the option to retrofit a CO ²
Solenoid Valve Pro. The CO ² Solenoid Valve Pro is screwed between the fitting and the needle valve
needle valve from the needle valve. Then connect the needle valve to the connecting screw of the CO ² Solenoid
Valve Pro . It is essential that you wrap the outer thread of the connections with 4 – 5 layers of Teflon tape
3
(included in the delivery) to ensure 100 % tightness. Then screw the completely assembled CO ² Solenoid Valve Pro
into the fitting . Align the CO ² Solenoid Valve Pro and check the threaded connections for tightness!
4
2
6
CO ² , connection according to DIN 477 Part 1
6
0 – 3 bar
2 x G 1/4"
stainless stee
(item no. 80243)
1
3
3
7
Connections:
Microfilter:
Material:
Weight:
. Remove the
1
2
4
4
8
output for CO ² hose
2 units installed
nickel-plated brass
approx. 960 g
2
5