Adjusting The Belt Alignment And Running - Dick SM-100 Manual De Instrucciones

Putting into operation

Adjusting the belt alignment and running

DAMAGE TO THE BELT GRINDER DUE TO SKEW RUNNING
A misaligned, skew-running belt damages the housing.
• Before switching on the belt grinder, check the running of the
grinding belt, to ensure it is straight.
Adjust the belt as follows:
Figure 7.3 – Grinding arm
[1] Right-hand side panel
[2] Fastening screws
Figure 7.4 – Belt alignment and running
[3] Adjusting screw
GRINDING BELT!
1
2
2
3
SM-100 belt grinder
7
19