Servicing And Maintenance; Cleaning The Belt Grinder; Changing The Grinding Belt - Dick SM-100 Manual De Instrucciones

Servicing and maintenance

9. Servicing and maintenance
Risk of injuries due to unauthorised or thoughtless switch-
ing on or wrong spare parts
• Always disconnect the mains plug before carrying out any
maintenance or repair work on the belt grinder.
• Only use original spare parts of Friedr. Dick GmbH & Co. KG.
Risk of injuries due to improper repair work
• Any repair work on electric components may only be carried
out by qualified electricians.
9.1

Cleaning the belt grinder

The belt grinder must be cleaned after each work session.
1 Remove the covers (Figure 6.2 – Structure and function),
2 Remove residual abraded material from the machine, e.g.
using a brush.
3 Tightly screw the covers back on.
9.2

Changing the grinding belt

Change the grinding belt if it has become blunt. (Interval: approx.
30 - 50 grinding operations).
Replace the grinding belt as follows:
WARNING
WARNING
SM-100 belt grinder
9
29