Remote Control; Installation - Klarstein Thermaxx Heatstream Manual De Instrucciones

Remote control

...
Note: The button functions of the remote control basically correspond to the button
functions of the control panel on the device housing, but no key combination can be
called up with the remote control.

INSTALLATION

1. Turn the appliance upside down.
2. As shown in figure 1, align the mounting hole of a set of caster assembly and install
it on the screw of the caster pad plate at the end of the radiator fin, and the other
caster assembly is aligned to the screws mounted at the bottom of the control box.
3. As shown in figure 2, two sets of caster components are tightened with four butterfly
nuts. Install solid and then put the appliance in place, just put the wheels on the
ground.
Figure 1
Standby button
Mode button
+
increase
-
decrease
Timer button
Figure 2
EN
Butterfly nuts
Control box
17