Device Control Via Smartphone - Klarstein TAAL SMART Manual Del Usuario

EN
24
Manual operation
To access manual mode, turn on the power switch and press the on/off button
to turn on the heater. The "M" symbol appears in the display. Set the desired
temperature by pressing the + or - buttons. After 2 seconds, the display shows the
current room temperature again.
If you want to set the timer, press the timer button and "00H" appears in the
display. Set the desired time until the heating switches off automatically with the +
or - buttons.
Child safety lock
Press the On/Off button on the control panel for 5 seconds to activate the child
lock. CL" is shown on the display. Press the On/Off button for 5 seconds to
deactivate the child lock.

DEVICE CONTROL VIA SMARTPHONE

If you integrate your Klarstein appliance into your home WLAN, you can operate
it conveniently via the associated Klarstein app. The app not only allows you to
control the appliance remotely via your smartphone, but also gives you access to
recipes and further information.
Follow these steps to connect your smartphone to your Klarstein appliance:
1. First download the Klarstein app by scanning the QR code with your
smartphone (see below) or download it directly from the App Store or Google
Play.
2. Make sure that your smartphone is connected to the same WiFi network that
your Klarstein device is to be connected to.
3. Open the Klarstein app.
4. Log in with your account. If you don't have an account yet, register in the
Klarstein app.
5. Follow the instructions in the app.
App download
Use the scan function of your mobile phone to scan the QR code and save the app
on your smartphone.
Note: Further instructions on how to use the app and help on how to connect to
your device are provided by the app when you open it for the first time.