Pioneer ELITE VSX-LX103 Manual De Instrucciones página 94

Setting Item Default Value Setting Details
USB Power Out Off When this function is set to "On", electricity can be
at Standby supplied to the device connected to the USB port
even if this unit is in standby mode .
Network Standby On When this feature is turned "On", you can turn
on the power of the unit via the network using an
application such as Pioneer Remote App that can
control this unit.
Bluetooth Wakeup Off
• Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It can
be selected when the network function is activated.
• While using this function, power consumption
increases in standby mode, however, the
increase in power consumption is minimized by
automatically entering the HYBRID STANDBY
mode where only the essential circuits are
operating.
• When "Network Standby" is used, power
consumption increases in standby mode,
however, the increase in power consumption is
minimized by automatically entering the HYBRID
STANDBY mode where only the essential circuits
are operating.
• When connection to the network is lost, "Network
Standby" may be disabled to reduce power
consumption. In such a case, turn the unit on by
using the power button on the remote controller
or main unit.
This function wakes up the unit on standby by
connecting a BLUETOOTH-enabled device.
"On": When this function is used
"Off": When this function is not used
• When this is set to "On", power consumption
increases in standby mode, however, the
increase in power consumption is minimized by
automatically entering the HYBRID STANDBY
mode where only the essential circuits are
operating.
• This setting is fixed to "Off" if "Network/
Bluetooth" - "Bluetooth" - "Auto Input Change" is
set to "Off".
Contents Connections
≫
„ 12V Trigger
Set when outputting the control signal (maximum 12 V/100 mA) through the 12V
TRIGGER OUT jack. Different settings can be set for each input selector. You can
enable power link operation when you connect the unit and the external devices
equipped with 12V trigger input jack.
Setting Item Default Value
BD/DVD Off
CBL/SAT Off
GAME Off
STRM BOX Off
HDMI 5 Off
94
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BD/DVD" is selected as input
source for the main room.
"Zone2": Output when "BD/DVD" is selected as
input source for ZONE2.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CBL/SAT" is selected as
input source for the main room.
"Zone2": Output when "CBL/SAT" is selected as
input source for ZONE2.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "GAME" is selected as input
source for the main room.
"Zone2": Output when "GAME" is selected as input
source for ZONE2.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "STRM BOX" is selected as
input source for the main room.
"Zone2": Output when "STRM BOX" is selected as
input source for ZONE2.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "HDMI 5" is selected as input
source for the main room.
≫