Connecting An Av Component In A Separate Room (Multi-Zone Connection); Connecting A Pre-Main Amplifier (Zone 2) - Pioneer ELITE VSX-LX103 Manual De Instrucciones

Connecting an AV Component in a Separate Room (Multi-zone Connection)

Connecting a Pre-main Amplifier (ZONE 2)

a
BD/DVD
a Analog audio cable
Contents Connections
≫
You can enjoy 2-ch audio in the separate room (ZONE 2) while performing 7.1-ch
playback in the main room (where this unit is located). Connect the ZONE 2 PRE/
LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier or
power amplifier in a separate room with an analog audio cable. The same source
can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
• To output audio from an externally connected AV component to ZONE 2,
use an analog audio cable for connection. Also, the audio from externally
connected AV components can be output to ZONE 2 only when the audio is
analog signal.
a
LINE
IN
Premain Amp.
36
Playback
≫
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫