Display - Pioneer ELITE VSX-LX103 Manual De Instrucciones

Display

1
1. This may light when performing operations with the "NET", "USB" input
selector.
2. Lights in the following conditions.
Z2: ZONE 2 is on.
: Connected by BLUETOOTH.
: Connected by Wi-Fi.
NET: Lights when connected to the network with the "NET" input selector. It
will blink if incorrectly connected to the network.
USB: Lights when the "USB" input selector is selected, a USB device is
connected and the USB input is selected. It will blink if the USB device is not
properly connected.
HDMI: HDMI signals are input and the HDMI input is selected.
DIGITAL: Digital signals are input and the digital input is selected.
3. Lights according to the type of input digital audio signal and the listening
mode.
4. Lights in the following conditions.
TUNED: Receiving AM/FM radio.
STEREO: Receiving FM stereo.
SLEEP: Sleep timer is set. ( p93)
AUTO STBY: Auto Standby is set. (
5. Lights when headphones are connected.
6. Blinks when muting is on.
Contents
2 3
p93)
Connections
≫
4
7
7. Displays various information of the input signals.
8. Lights when adjusting the volume.
9. Speaker/Channel display: Displays the output channel that corresponds to the
selected listening mode.
8
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
5 6
8 9
≫