Optional Features; Automatic Shutoff - GE 106800 Manual De Instrucciones

840094500 Ev01 12/17/01 8:48 AM Page 5
To Vertical Steam
1. Unplug iron. Fill the Removable
Reservoir according to directions.
Replace Reservoir.
2. Plug iron into outlet.
3. Turn the Temperature Control Dial
to highest setting.
4. Allow two minutes for the iron to
reach desired temperature.
5. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.

Optional Features

Adjustable Steam Switch – This switch
Spray and Blast of Steam Buttons – Push
Blast Spray
6. Hold iron about 6 inches away from
7. To turn iron off, turn Temperature
8. Empty water from the iron following
NOTE: Do not allow hot soleplate to
touch delicate garments.
provides minimum
steam for wool or
maximum steam
for linen. Set the
switch to O to
change to
Dry Iron.
Blast Button for an
extra blast of steam.
Push Spray Button
to release a fine
spray of water for
difficult wrinkles in
cotton or linen.
garment and
press and
release the Blast
Button to steam
out wrinkles.
Do not press the
Blast Button
more than once
every 2 seconds.
Control Dial to Off. Unplug iron.
directions in "Caring for Your Iron."
(on selected models)
Automatic Shutoff Reset Button and Power
On Light – The

Automatic Shutoff

Reset
Reset Button light
Button
comes on when the
iron is first plugged
in. After one hour,
Power
the iron will shut
Light
off and the light
will go out. Push
the Reset Button to turn iron back on.
The Power On Light comes on when
the iron is plugged in and remains on
until the iron is unplugged. The light
stays on even if Temperature Control
Dial is turned to Off.
5