Siemens SIMATIC NET SCALANCE XM-400 Manual De Configuración página 1214

Índice alfabético
D
das delete, 177
das discover interface, 173
das mac blink, 176
das mac ip, 175
das mac name, 174
dcp forwarding, 395
dcp server, 381
no dcp server, 382
default-information originate, 699
no default-information originate, 700
default-information originate always, 701
no default-information originate always, 702
delay-mechanism, 240
delete, 147
deny, 1079, 1091
deny icmp, 1094
deny tcp, 1098
deny udp, 1103
Designated Forwarder, 940
Designated Router, 940
disable, 100
distance (IPv4), 862
no distance, 863
distance (IPv6), 881
no distance, 882
distance (OSPF)
no distance, 690
distance (OSPFv2), 689
distance (OSPFv3), 757
no distance, 758
distribute prefix
no distribute prefix, 884
distribute prefix (IPv6),
distribute-list (OSPFv3), 760
distribute-list route-map, 711
no distribute-list route-map, 712
distribute-list route-map (IPv4), 863
no distribute-list route-map, 864
distribute-list route-map (IPv6), 885
no distribute-list route-map, 885
do, 73
domain name, 445
domain-id, 637
domain-name, 638
dot1x guest-vlan, 1120, 1124
no dot1x guest-vlan, 1121, 1124
dot1x guest-vlan reset, 1126
dot1x guest-vlan vlan-id, 1125
no dot1x guest-vlan vlan-id, 1126
1214
dot1x mac-auth, 1121, 1128
no dot1x mac-auth, 1129
dot1x mac-auth mac-addr count, 1133
dot1x mac-auth port reset, 1130
dot1x mac-auth vlan-assign, 1130
no dot1x mac-auth vlan-assign, 1131
dot1x nas-id, 1123
dot1x port-control, 1132
no dot1x port-control, 1133
dot1x reauthentication, 1135
no dot1x reauthentication, 1136
dot1x timeout reauth-period, 1136
no dot1x timeout reauth-period, 1137
dscp-map, 1039
duplex, 120
no duplex, 121
E
enable, 100
ethernetip, 110
event config, 1152
no event config, 1155
events, 1148
exit, 72
F
factoryclean, 194
firmware-on-plug, 194
no firmware-on-plug, 195
flowcontrol, 1033
fmp, 1166
fmp power-loss, 1168
fmp rx-power, 1169
G
Glosario, 37
Glosario de SIMATIC NET, 37
H
help, 74
host, 492, 762
hrp-redundancy-loss, 1159
no hrp-redundancy-loss, 1159
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Manual de configuración, 03/2020, C79000-G8978-C252-14