Hedge Trimmer Safety Warnings - MADER GARDEN CYHT06D-550 Manual De Instrucciones

adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Service
Have your power tools serviced by a qualified repair person using only identical replacement parts. This will ensure
that safety of the power tool is maintained.

Hedge trimmer safety warnings

Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off when clearing jammed material. A moment of inattention
while operating the hedge trimmer may result in serious personal injury.
Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge
trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal
injury from the cutter blades.
Keep cable away from cutting area. During operation the cable may be hidden in shrubs and can be accidentally
cut by the blade.
Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring or
its own cord. Cutter blades contacting a "live" wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
Wear hearing protection.
Recommend to use a residual current device with a tripping current of 30 mA or less.
When cutting, make sure do not touch objects such as wire fences or plants frame holder.
Doing so can damage the blade beam.
Hold the electric hedge trimmer with both hands firmly, with one hand on the rear and with
the other hand on the front handle. Thumb and fingers must firmly embraced.
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following
hazards may arise in connection with the tool's construction and design:
1. Damage to lungs if an effective dust mask is not worn.
2. Damage to hearing if effective hearing protection is not worn.
3. Health defects resulting from vibration emission if the power tool is being used over longer period of time or not
adequately managed and properly maintained.
19