A N - MADER GARDEN CYHT06D-550 Manual De Instrucciones

WARNING! This machine produces an electromagnetic field during operation. This field may under some
circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we
recommend persons with medical implants to consult their physician and the medical implant manufacturer before
operating this machine.
Specification
Model Rated voltage
Rated frequency
CYHT06D 550
230 240V 50HZ
Noise and Vibration information:
A weighted sound pressure level L
Uncertainty K
pA
A weighted sound power level L
Uncertainty K
WA
Declaration of the noise emission values
according to noise directive A weighted
sound power level L
Vibration a Front handle: m/s
h
Uncertainty K
Noise and vibration values determined according to EN 60745 1 and EN 60745 2 15.
Wear hearing protection while operating the power tool.
The declared vibration total value has been measured in accordance with a standard test method and may be used
for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning
The vibration emission during actual use of the power tool can differ from the declared total value depending on the
ways in which the tool is used.
There is the need to identify safety measures to protect the operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the trigger time).
Rated input
600W
CYHT06D 550
89.9 dB(A)
pA
3.27 dB
98.0 dB(A)
WA
3.27 dB
101 dB(A)
WA
2
4.38 m/s
2
Rear handle: m/s 3.37 m/s
1.5 m/s
No load Cutting
speed length
1
(min ) (mm)
1
1700min
550
2
2
2
20
Cutting
capability
(mm)
16