Maintenance And Servicing - MADER GARDEN CYHT06D-550 Manual De Instrucciones

First cut the sides from the bottom to the top. Cut the upper part giving it the shape you prefer, in a straight
horizontal form, roof like or rounded.
The safety blade has laterally rounded and staggered cutting teeth to reduce danger of injury. The additional shock
protection avoids inconvenient kickback when the blades come into contact with walls, fences etc.
If the blades are jammed or blocked by obstacles, switch the motor off immediately, pull the plug, and then remove
the object jamming the blades.
Caution! Metal obstacles like fences etc. may damage the cutting blades.
Always make sure to keep the extension cord behind your back and to start cutting the hedge at the point nearest to
the supply socked. Therefore plan your working direction before staring.

Maintenance and servicing

Before carrying out any checks or maintenance operations, disconnect the plug from the electric power supply.
Check your machine regularly before starting the work.
Damaged cutting blades have to be repaired or exchanged by a qualified service man before working with the
machine.
After each cutting operation, clean the cutting blade with a soft brush and cloth with lubricating fluid oil and spray a
thin layer of fluid protective oil.
Always keep the ventilation slots in motor housing clean.
Never clean or spray a machine with water. Clean the motor housing only with a moist cloth and never use
detergents or solvents! These could ruin the plastic parts of the machine. Finally, dry the motor housing carefully.
Store the machine with the supplied protection cover.
22