Parts Descrip; Application Range; Before Star Ng The Machine; St The Machine - MADER GARDEN CYHT06D-550 Manual De Instrucciones

Parts Description
1. Blade
2. Safety protection guard
3. Front handle with on/off switch
4. Rear handle with on/off switch
5. Cable holder
6.
Cable

Application range

The hedge trimmer should only be used for trimming hedges, bushes and shrubs. Other use of the trimmer, not
included in this manual, could damage the trimmer or seriously injure the operator.
Before starting the machine
Connection
This hedge trimmer may only be connected to single phase AC current. Ensure that the mains voltage is the same as
the operating voltage indicated on the rating plate.
Connect the power plug to the coupling of an appropriate extension cord. Form a loop, push it through the opening
in the rear handle and hook over the cable holder (5).
Starting the machine
Warning! Only use this machine for applications described in the chapter 'application range'
Switching on / off
Switching on: press the on/off switch (4) of the rear handle and the switch (3) of the front handle with both hands at
the same time.
Switching off: release one of the switches (4) or (3).
The blade brake makes the blades stop immediately within 0.5 s, the small flash in the area of the upper ventilation
slots is normal and does not harm to you or the machine.
Cutting hedges
Before you start your work, select branches with a diameter bigger than 16mm and cut them with a pruning shear.
A trapezoidal cut corresponds to the natural, growth of plants and results in optimal hedge growing.
21