Reolink Argus 2 Guia De Inicio Rapido página 4

Setup Camera on Reolink App (For Smartphone)
Download and install the Reolink App in App Store (for iOS) and Google Play (for Android).
Available on the Get it on
Please follow the prompt tone to configure the camera.
1. Please click the " "
button in the top right corner
to add the camera.
2. Scan the QR code on the
back of the camera.
3. Click "Connect to Wi-Fi" to
configure the wifi settings.
Note：
• Reolink Argus 2/ Argus pro
Camera only support 2.4GHz
wifi, 5GHz is not supported.
• Your family can click "Access
Camera" for live view after
the initial setup.
4 English
4. A QR code will be generated on the phone. Please place the QR code on your phone towards Reolink
Argus 2 or Pro camera's lens at a distance of about 20cm (8 inches) to let the camera scan the QR
code. Please make sure that you've ripped the protection film of the camera's lens.
Note: To help scanning, please click the QR code to display in full screen
5. Follow the steps to finish the Wifi settings.
6. After you created a password for your camera, please follow the steps to sync the time, and then
start live view or go to "Device Settings"
20 cm ( 8 inch )
Menu
Add New Device
Enable/Disable PIR
Motion Sensor
(In default, the PIR
sensor is enabled.)
r Device Settings
Access the Live View
Battery Status
English 5