Axis Q1615 Mk II Guia De Instalacion página 16

AXIS Q1615 Mk II Network Camera
Product
AXIS Q1615 Mk II
Connectors
I/O connector
4–pin terminal block
For an example diagram, see Connection Diagrams on page 15.
Function Pin
1
0 V DC (-)
2
DC output
3–
Configurable
4
(Input or
Output)
Temperature
0 °C to 55 °C
(32 °F to 122 °F)
Notes
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
Digital input – Connect to pin 1 to activate,
or leave floating (unconnected) to deactivate.
Digital output – Connected to pin 1 when
activated, floating (unconnected) when
deactivated. If used with an inductive load,
e.g. a relay, a diode must be connected in
parallel with the load, for protection against
voltage transients.
Humidity
10-85% RH (non-condensing)
16
Specifications
12 V DC
Max load = 50 mA
0 to max 30 V DC
0 to max 30 V DC, open
drain, 100 mA