Axis Q1615 Mk II Guia De Instalacion página 19

The product can be used with most operating systems and browsers. We recommend the following
browsers:
• Internet Explorer
®
• Safari with OS X
TM
• Chrome or Firefox
For more information about using the product, see the User Manual available at www.axis.com
Adjust focus and zoom for included lens
1. Access the product's web page and go to Setup > Basic Setup > Focus & Zoom.
2. Under the Basic tab, adjust Zoom level and then click Perform auto focus.
3. For additional focus adjustments, go to the Advanced tab.
Note
If the camera does not focus, try to calibrate the optics in System Options > Maintenance,
and perform auto focus again.
Replace the Lens
Note
There is no need to restart the product after changing the lens. However, the product
must be restarted if you are interchanging between a P-Iris, DC iris, i-CS or fixed/manual
iris lens. In order to set the focus and position the lens, the product must be connected
to the network.
It is possible to use optional lenses for the Axis product.
To replace the lens:
1. Disconnect the iris cable.
2. Unscrew the standard lens.
3. Attach and screw on the new lens.
Note
If you select a DC iris configuration file for a P-Iris lens, an error message will appear below
the iris configuration type in the Camera Settings page.
For optional DC iris lenses, select Generic DC iris option.
To change the iris configuration:
1. Go to Setup > Video and Audio > Camera Settings. Iris configuration shows the
current configured iris type.
2. Click Edit.
3. Select the installed iris lens from the drop-down list and click OK.
AXIS Q1615 Mk II Network Camera
® ®
with Windows
®
®
with other operating systems.
19