Line In / Optical / Coaxial / Hdmi Arc Operation; Bluetooth Operation; Pair Bluetooth-Enabled Devices; Listen To Music From Bluetooth Device - Hisense HS218 Manual De Usuario

LINE IN / OPTICAL / COAXIAL /
HDMI ARC Operation
1 Ensure that the unit is connected to the TV or
audio device.
2 Press the button repeatedly on the unit or the
SOURCE button on the remote control to select
the LINE, OPTICAL, COAXIAL, HDMI ARC mode.
3 Operate your audio device directly for playback
features.
4 Press the VOL +/– button to adjust the volume
to your desired level.
Tip:
• The unit may not be able to decode all digital
audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
Ensure that the audio setting of the input
source (e.g. TV, game console, DVD player,
etc.) is set to PCM or Dolby Digital (Refer to
the user manual of the input source device
for its audio setting details) with HDMI ARC /
OPTICAl / COAXIAL input.

Bluetooth Operation

Pair Bluetooth-enabled Devices

The first time you connect your bluetooth device to this
player, you need to pair your device to this player.
Note:
- The operational range between this player
and a Bluetooth device is approximately 26
feet (8m) (without any object between the
Bluetooth device and the unit).
- Before you connect a Bluetooth device to this
unit, ensure you know the device's capabilities.
- Compatibility with all Bluetooth devices is not
guaranteed.
- Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
- If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
1 D u r i n g O N m o d e, p re s s t h e
repeatedly on the unit or the
the remote control to select Bluetooth mode.
"NO BT" will show on the display if the unit is
not paired to any Bluetooth device.
2 Activate your Bluetooth device and select the
-
3 Select "Hisense HS218" in the pairing list. After
4 Play music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can :
-
-
-
Tips:
•
•
•
•
•
•

Listen to Music from Bluetooth Device

-
-
1 Pair your device with the player.
2 Play music via your device (if it supports A2DP).
3 Use supplied remote control to control play (if
b u t to n
-
(BT) button on
-
12
search mode. "Hisense HS218" will appear on
your Bluetooth device list.
If you cannot find the unit, press and hold the
/PAIR button on the remote control to be
searchable. The display will show "PAIR" and
you will hear "Pairing" from the unit.
successful pairing, you will hear "Paired" from
the unit, and the display panel shows "BT".
Switch to another function on the unit.
Disable the function from your Bluetooth
d e v i c e . T h e B l u e t o o t h d e v i c e w i l l b e
d i s c o n n e c t e d f r o m t h e u n i t a f t e r t h e
"Disconnected" voice prompt.
Press and hold the
remote control.
Enter "0000" for the password if necessary.
If no other Bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
The player will also be disconnected when your
device is moved beyond the operational range.
If you want to reconnect your device to this
player, place it within the operational range.
If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected to the player.
If the connection is lost, follow the instructions
above to pair your device to the player again.
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the
device through the player.
If the device also supports Audio Video Remote
Control Profile (AVRCP), you can use the
player's remote control to play music stored on
the device.
it supports AVRCP).
To pause/resume play, press the
button on the remote control.
To skip to a track, press the
the remote control.
/PAIR button on the
/PAIR
/
buttons on