Cleaning And Maintenance - Philips FC9259 Manual Del Usuario

English
10
Specific types only: The suction power level disappears from the display, the timer stops
,
counting up the time and after approx. 10 seconds, the display goes out.
 Insert the ridge on the nozzle into the parking slot to park the tube in a convenient
position (Fig. 0).
 To ensure stable parking of the telescopic tube, adjust the tube to the shortest length.
 To continue vacuum cleaning, simply press the on/off/standby button on the control panel
again.
Specific types only: The previously selected suction power level appears on the display again
,
and the timer continues to count up the vacuuming time.
Using the filter-cleaning handle to clean the filter cylinder
A clean filter cylinder helps maintain high suction power.
After every vacuuming session, clean the filter cylinder in the way described below.
1 Switch off the appliance and unplug it.
 Keep the appliance in horizontal position, with all wheels touching the floor.
Always leave the hose connected to the appliance during the filter-cleaning process to prevent
dust from coming out of the appliance.
 Press the cover release button (1) and open the cover () (Fig. 1).
 Turn the filter-cleaning handle until it has made 6 full circles (Fig. 32).
5 Close the cover firmly ('click').
Reminder to clean the filter cylinder
You have to clean the filter cylinder by turning the filter-cleaning handle after each vacuuming
session. This prevents the filter cylinder from clogging and helps maintain optimal suction power.
If you fail to clean the filter cylinder with the filter-cleaning handle a number of vacuuming sessions
in a row:
- the filter-cleaning reminder light flashes for 15 seconds (types without display) (Fig. 9).
- the filter-cleaning reminder symbol on the display flashes for 15 seconds (types with
display). (Fig. 8)

Cleaning and maintenance

Use the filter-cleaning handle to clean the filter cylinder after every vacuuming session.
Cleaning the dust bucket and filter cylinder unit
Always unplug the appliance before you empty the dust bucket.
The dust bucket is not dishwasher-proof.
Empty the dust bucket as soon as the dust level has reached the round disc of the filter cylinder
case.
1 Switch off the appliance and remove the mains plug from the wall socket.
 To disconnect the hose, press the release button (1) and pull the hose out of the appliance
() (Fig. 6).
 To unlock the cover, press the cover release button (1). Swing open the cover (). (Fig. )
 Lift the dust bucket out of the appliance (Fig. ).