Getting Started; Helpful Hints; Care & Cleaning; Center Left Side Panel - Twin-Star International 23MM705 Manual De Instrucciones Adjunto

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

P L E A S E R E A D A N D F O L L O W A L L S A F E T Y T I P S
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: www.twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
• Some steps are more easily handled with two adults.
• Attach the f ireplace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new fireplace, take your time and use the hardware provided and a
quality Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
• Do not sit on top of the mantel.
1. Dust your fireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your f ireplace with a gentle non-abrasive household cleaner. Make sure to dry your
f ireplace immediately with a soft cloth or towel.
For a complete tight fit every bolt
should have a flat washer. First slide a
flat washer onto the bolt. Your bolt is
now ready for use.
Now it is time to assemble your Fireplace. All
panels are labeled Left and Right as viewed
from the front of unit.
1. Locate the Center Left Side Panel (B), Center
Right Side Panel (C), Center Shelf (D), and set
out face down on a scratch-free surface.
2. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
3. Push the Center Left Side Panel and Center Right
Side Panel snug to the Center Shelf (D). Make
sure the Wood Dowels are seated in the
pre-drilled holes. Insert Bolts (L) and Washers
(M) into the holes in the mounting blocks.
HAND TIGHTEN ONLY.
E-2

GETTING STARTED

CAUTION:

HELPFUL HINTS

CARE & CLEANING
Center
Left Side
Panel
B
Center
Right Side
Panel
N

Center Shelf

D
N
M
L
C
N
N

Publicidad

Tabla de contenido
loading

Tabla de contenido