Left Side Panel; Right Side Panel - Twin-Star International 23MM705 Manual De Instrucciones Adjunto

4. Locate Hearth/Base (A) and set out finished
side upon the floor.
5. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
6. Attach the Completed Center Front assembly
from step 3 to the Hearth/Base (A). Make
sure the dowels are seated into the pre-drilled
holes in the Hearth/Base. Using Bolts (L) and
Washers (M) attach panels through
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
7. Locate Left Side Panel (E) and Right Side
Panel (F), insert one Wood Dowel (N) into
each of the pre-drilled holes on the bottom
edge of the panels. Then use Bolts (L) and
Washers (M) through the pre-drilled holes
in the mounting blocks. Attach the Side
Panels to Hearth / Base (A).
HAND TIGHTEN ONLY.
Center
Right Side
Panel
N
N
F
Right
Side
Panel
N
N
Center
Left Side
Panel
L
M
N
N
Hearth/Base
A
BACK
Hearth/Base
A
BACK
E
Left
Side
Panel
L
M
N
N