Left Front Door; Right Front Door; Shelf Pin; Knob(With Bolt) - Twin-Star International 23MM705 Manual De Instrucciones Adjunto

13. Locate Right Front Door (K) and Left Front
Door (J). Slide door hinge keyhole into panel
hinge bracket. (Diagram 1)
Use Phillips Head Screwdriver to tighten
screws. (Diagram 2)
TO ADJUST HINGES
To adjust door forward or backward change
keyhole slot position. (As Shown In
Diagram 3a)
To adjust door right or left loosen / tighten
screw. (As Shown In Diagram 3b)
To adjust door up or down adjust bracket
height. (As Shown In Diagram 3c).
14. Attach the Knob (V) to the Left Front Door
(J) and Right Front Door (K), use the bolts
attached through the pre-drilled holes in the
doors. Then use a Phillips Head Screwdriver
to tighten the bolts.
15. Remove Shelf Pin (O) from bag. Choose
desired height of Shelf (H) and place the
four Shelf Pin (O) into same height shelf
holes inside side Panels. Insert Wood
Shelf (H), allow Wood Shelf (H) to rest
on the Shelf Pin (O).
16. Using Phillips head screwdriver tighten
all Bolts alternating top and bottom, left
and right.
E-5
1 2
Completed Assembly
Left
Front
J
Door
H
Shelf
Pin
O
3
c
a
b
V
Knob
(With Bolt)
K
Right
Front
Door
H