Metra 99-8249 Instrucciones De Instalación página 3

5. Unclip and remove the vent panel
above the radio. (Figure E)
6. Remove (4) 10 mm bolts securing
the radio and climate control
assembly (2 above and 2 below).
(Figure F)
7. Unplug and remove the assembly
from the dash.
8. Remove (10) Phillips screws
securing the factory radio brackets
to the assembly. Note: (4) Phillips
screws securing the climate
controls will be needed for kit
assembly.
9. Unclip the climate controls from
the assembly then remove the
(2) white panel clips and keep
for kit assembly.
Continue to kit assembly
Dash Disassembly
(Figure E)
99-8249
(Figure F)
3