Metra 99-8249 Instrucciones De Instalación página 5

ISO DDIN radio provision
1. Attach the white panel clips
removed in step 9 of dash
disassembly to the radio housing
trim panel.
2. Clip the climate controls onto the
radio housing trim panel.
3. Connect the radio brackets to the
radio housing trim panel with (4)
#8 x 3/8" Phillips screws supplied.
(Figure A)
4. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
Kit Assembly
(Figure A)
99-8249
5. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
6. Mount the new radio assembly into
the dash and reassemble the dash
in reverse order of disassembly.
5
(Figure B)