Radio Operation - JVC XS-F527B Manual De Instrucciones

MICROPHONE ECHO ADJUSTMENT
Press toturn on or off the microphone echo effect.
FLASHING LIGHT
There are 5 modes for the DISCO LED lighting. Press
modes. To deactivate this function, repeatedly press
L-1: By default mode, blue LED will be on constantly when it is selected.
L-2: Blue LED will be on flashing mode.
L-3: Red LED will be on constantly.
L-4: Red LED will be on flashing mode.
L-5: 7 colors LED will be on flashing mode.
There are 3 modes for the decoration LED lighting around the speakers. Press and
hold to choose the light modes. To deactivate this function, press and hold
until "OFF" is displayed.
E-1: By default mode, blue LED will be on constantly when it is selected.
E-2: Red LED will be on constantly.
E-3: Blue and red LED flashing alternatively.

RADIO OPERATION

Listen to FM radio broadcasts. Repeatedly press
and the radio frequency.
Note: In order to get the best reception, extend the FM ANT. on the rear of the unit before use to
its full length.
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
• Tune to a station by repeatedly pressing
frequency is shown on the display.
AUTO PRESET MEMORY / SCAN
To scan for stations within reception range and save them to preset memory automatically,
press and hold
preset number 1 (P01).To tune to a preset station:
• To tune to the next preset station, press
• To tune to the previous preset, press
MANUAL PRESET MEMORY OPERATION
Choose which stations to save in preset memory instead of scanning automatically.
1. Repeatedly press
save as a preset (e.g., 93.1).
. After the unit is finished scanning, the unit will automatically tune to
or to tune to the station that you want to
EN-6
EN-9
to choose the light
until"OFF"is displayed.
until the display reads FM
or repeatedly. The station
.
.