Device Description; Device Operation - Adler europe AD 4078 Manual De Uso

16. In order to avoid injuries handle the blades carefully.
17. Watch out for long hair, scarves, neckties hanging above the cup and operating
components of device.
18. For safety reasons use only original accessories and spare parts intended for particular
blender type, available at authorized service center.
19. Handle the blades with extreme care while disassembling accessories. The blades can
cause cuts.
20. Change the accessories only when the device is switched off. Disconnect the device
from the power.
21. Do not put any products other than food and liquids in the blender cup. Do not put hot
products in the cup.
22. The device is not suitable for whipping egg whites or kneading dough.
23. Don't use aggressive detergents to clean the housing, as it may remove the
informational graphic symbols such as: scale, signs, safety marks, etc.
24. Do not start the empty mixing cup, without product inside.
25. MAXIMUM PERIOD OF CONTINUOUS BLENDER OPERATION IS 3 MINUTES. After
3 minutes of continuous operation stop the device and wait couple of minutes before
restarting.
26. Do not pour hot liquids (above 60 degrees Celsius) into the food processor.
27. If the blades are blocked, always disconnect the power cable plug from the power
socket before removing the blocking elements in the blender cup.
28. Do not move the appliance during operation.

DEVICE DESCRIPTION

1A – cover 1B – jar lid
1D – blade 1E – drainage system
1G - 3 programs: smoothie, ice crush, pulse

DEVICE OPERATION

Before first use:
1. Remove all stickers from the housing, cup and cover of the blender.
2. Wash the device according to part CLEANING AND MAINTENANCE.
Blender operation:
1. Put the blender main body (1H) on stable, level surface.
2. Make sure the speed adjustment knob (1F) is set to the OFF position.
3. Place the blender jar (1C) on the body (1H). Blender jar doesn't have a position a lock. You can place it in any position on the blender
body (1H) that you want.
4. Remove cover (1B) from the blender cup (1C), put in the ingredients to be mixed. In order to avoid overflow, the level of ingredients in
the jar should not exceed marked level on the jar.
5. Connect the power plug to the power outlet.
6. Turn the blender on by moving speed adjustment knob (1F) to ON position. Program and knob lights will start flashing.
BLENDING WITH ADJUSTED SPEED
When processing different foods, you can use the rotating speed adjustment knob (1F) to choose first or second speed. Blender has
overheat protection, the unit can stop automatically after working for 2 minutes continuously.
BLENDING WITH PROGRAMS
SMOOTHIE - if you want to stir, please rotate the speed adjustment knob to ON and press "SMOOTHIE" button. Blender will work for 3
seconds then stop for 1.5 seconds, after working for 3 cycles, it will keep working for 45 seconds then will stop automatically.
ICE CRUSH - if you want to crush ice, please rotate the speed adjustment knob to "ON" and press "ICE CRUSH" button. Blender will
1C – blender jar
1F – speed adjustment knob
1H – blender body
4