Mitsubishi Electric LDT322V Manual Del Usuario página 15

7. Adjust the sound
Make adjustments when adjustment of the volume is required.
8. Adjust the screen (See pages 23-31)
Make adjustments when adjustment of the screen display
position or distortion is required.
9. Adjust the image (See page 23-31)
Make adjustments when adjustment such as the brightness
or contrast is required.
10. Recommended Adjustment
To reduce the risk of "image persistence", please adjust
the following items based on the application being used.
"POWER SAVE" (See page 26), "SCREEN SAVER" (See
page 26), "SIDE BORDER COLOR"(See page 26), "DATE
AND TIME" (See page 29), "SCHEDULE"(See page 29).
11. Installing and removing the stands
The stands are prepared as option.
How to install the stands
1. Please turn monitor off.
2. After inserting stand in guide block, fasten M6 x 16 screws
on both sides of the monitor.
How to remove the stands
1. Spread the protective sheet on the fl at surface, such as a
desk.
2. Place monitor on the protective sheet.
3. Remove screws with a screwdriver and place them in a
safe place for reuse.
Screws
Stands
All manuals and user guides at all-guides.com
12. To prevent the main power switch
To prevent the ability to use the main power switch, please
attach the main switch, which is enclosed as an accessory.
NOTE:
With the main power switch cover in place, the main power
switch can not be turned off. Remove main power switch
cover in order to switch off the display.
English-11
from being changed
Screws
Main switch cover