Listening To A Cassette Tape - Teac GF-550 Manual Del Usuario

1 Press the PHONO/TAPE/AUX button once or twice to select
TAPE.
< Each time the PHONO/TAPE/AUX button is pressed, PHONO,
TAPE and AUX (external component) are selected alternatively.
2 Slowly open the cover.
< When opening the cover, pay attention to prevent your hand
from getting caught.
3 Set a recorded cassette tape in the cassette holder.
Set a cassette tape with the exposed tape in front and the side to
play facing up.
Side to play
4 Set the TAPE switch.
When playing a normal tape (type I), set the TAPE switch by the
turntable to NORMAL. When playing a chrome tape (type II) or
metal tape (type IV), set the switch to HIGH.

Listening to a Cassette Tape

5
A
B
< To enter PAUSE mode at the current position, order of pressing
Tape
C
Press the PLAY button (y).
Playback starts.
When the playback of one side finishes, the playback stops. To play
the other side, turn over the cassette tape.
To stop playback
Press the STOP button (H) during playback to stop.
To pause playback
Press the PAUSE button (J) during playback .
Press the button again to start playback again.
the PAUSE button first and then pressing the PLAY button is
required in the STOP mode.
Fast-forwarding/rewinding
Press the F.FWD or REW button (,/m) to fast-forward or
rewind a tape respectively.
To stop fast-forwarding or rewinding, press the Stop button (H).
Never press the PLAY button (y) and REW button (m) at
the same time.
When a tape is fast-forwarded or rewound to the end, make
sure to press the STOP button (H) to stop the function.
23