Rs232 Connector; Data Transmission Format - sylvac Hi_Cal 150 Modo De Empleo

Other measurements in diameter mode:
Groove meas

RS232 connector

The RS232-C port allows connection to a computer or a printer to protocol the
measurement results.
Most Hi_Cal functions can be controlled by RS232 or USB, using the remote
commands instruction set, which may be used as well for the prepositioning
of the probe.
Important : USB and RS232 must not be connected simultaneously.
If both connections are used, the USB connection will deactivate the
RS232 output.
Female 9 pin D-Sub connector (seen from the outside):
5 4 3 2
9 8 7

Data transmission format

Data transmission format:
4800 bds, 7 data bits, even parity, 1 stop bit.
14
Step meas
• Pin 1 :
1
• Pin 2 :
• Pin 3 :
6
• Pin 5 :
Thickness meas
9V DC output (only with
adapter connected)
RXD (RS232 output of
the Hi_Cal)
TXD
(RS232 input from
the PC)
SG signal ground