Replacing The Batteries; Technical Specifications Hi_Cal 150 / Hi_Cal 300 - sylvac Hi_Cal 150 Modo De Empleo

Replacing the batteries

Unscrew the fixing screw at the rear of the Hi_Cal base and remove the
battery cover | ergonomic handle to change batteries.
Important : please only use NiMH rechargeable battery pack delivered by
Sylvac for battery replacement

Technical specifications Hi_Cal 150 / Hi_Cal 300

Measuring range
Total measuring range
Resolution
Accuracy [µm]
(with standard probe, at 20 +0.5 °C)
Repeatability (+2s)
Measuring sensor max speed
Motor max speed
Measuring force (set at works)
Operation time
Weight
Data input / output
Number of measurements / second
In normal mode
In diameter/min/max mode
DC power supply
Battery
Operating temperature
Storage temperature
Thermal expansion coefficient (same value than steel) (11.5+1.5) x10
Measuring system
150mm | 300mm
160mm | 310mm
1 µm | 0.00005 IN
2.5 + L [mm] / 175 [mm]
2 µm | 0.00008 IN
3m/s
0.05m/s | 0.1m/s
0.2 - 0.3 N
40 hours
3.9 kg | 4.6 kg
RS232-C | USB
12 meas./s.
50 meas./s.
9V DC, 1100mA
4xAA NiMH 2200 mAh
+10° to +40°C
-20° to +45°C
[1/°C]
-6
Sylvac inductive system, patented
E
21