Krups EA819 ARABICA LATTE Manual De Instrucciones página 31

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 147
Rinsing the milk pot: Approximately 30 seconds
IMPORTANT: it is advised to perform this rinse:
- After each cappuccino for optimal hygiene.
- Before placing the milk pot in the refrigerator if it still contains some milk.
After each rinse, it is advised to clean the different parts of the system by running them under water; please
refer to the "Milk Pot Maintenance Manual" chapter.
The machine offers to perform a rinse of the milk pot after making cappuccinos, but you may also perform this rinse
any time that you wish to do so. This is possible even if there is some milk left in the container.
- Ensure that the milk pot is properly connected to the machine in locked position (lever lowered) (32).
- Turn the lid knob to the CLEAN position
- Press the settings and maintenance key
- Using the navigation key,
- Press START
(33).
At the end of this cycle, return the cappuccino system knob to the CAPPUCCINO position (24) before starting a new
recipe.
Manual maintenance of the milk pot: Approximately 5 minutes
IMPORTANT: it is recommended to clean the different parts of milk pot by running them under clean water.
These parts are not designed to be dishwasher-safe.
- Remove the flexible tube from the pot's opening and from the drink outlet (37)
- Unlock the milk pot by lifting the lock lever (38)
- Turn the knob to clean position
- Extract the cassette (40)
- Remove by pulling the cappuccino/clean selection knob (41)
- Remove the black silicone body from the cassette (42)
- Unscrew the steam nozzle tip located on the pot lid (43), unplug it if need be, using the needle provided for this
purpose (44)
- The milk pot is now fully disassembled.
- Clean each element using warm water (45)
- Dry them.
- Put them back in place (46) (to properly insert the knob, be sure to put it in clean position
- Again place the cassette in the pot lid (47)
Cleaning program: Approximately 13 minutes
Cleaning the coffee circuit serves to combat residue, greasy coffee deposits and to preserve the aromas of your drinks.
To perform this cleaning, you will need:
- 1 KRUPS cleaning tablet
- 1 container (minimum 600 ml)
The cycle will link two phases:
- 1 cleaning phase
- 1 rinse phase
When should this program be performed?
- Each quarter.
- When the appliance advises you by lighting up the pictogram
!
Important: You are not obliged to immediately perform the cleaning program when the appliance requests it, but
you must perform it soon. If the cleaning is postponed; the pictogram will remain displayed so long as
the operation is not performed.
It is recommended to perform the cleaning operation to degrease the appliance and to ensure optimal
preservation of your drinks' aromas.
The cleaning program is an intermittent cycle; do not place hands mains under the coffee outlets during
the cycle.
(32).
(31).
is positioned on
.
(39)
.
)
29

Publicidad

Tabla de contenido
loading

Tabla de contenido