Preparing A Cappuccino - Krups EA819 ARABICA LATTE Manual De Instrucciones

Starting the preparation (for 1 or 2 cups):
- Press the recipe choice key
- The coffee recipe menu is displayed.
- Place either 1 cup or 2 cups under the coffee outlets. You may lower or raise the coffee outlets based on the
size of your cup (10).
Personalisation
Strength
- Select the coffee strength (symbolised by coffee beans displayed on-screen between brackets)
the + key to increase it or the – key to reduce it
Volume
- Press the navigation key
- Select the desired volume
Number of cups
- Press the navigation key
- Select 1 or 2 cups
If you choose 2 cups, the machine will automatically link 2 full coffee preparation cycles.
- Press the START key
At any time, you may set the recipe volume using the + or – keys
To stop the flow into your cup, press the START/STOP key
You may also adjust the temperature of your coffee; to do so, press the settings and maintenance button
using the navigation key, position it on
BE CAREFUL, IF YOU INTERRUPT THE PREPARATION OF YOUR DRINK, STOPPAGE IS NOT
IMMEDIATE.
Depending on your drink, you may modify the grind level of the coffee beans; to do so, please refer to the "BEFORE
PREPARING DRINKS IMPORTANT INSTRUCTIONS" chapter.
Saving to your favourites
After having made your drink, you may save it to your favourites.
To do so, at the end of the flow of your drink, press the favourites key
select favourite B .
For more details, refer to the section SAVE YOUR FAVOURITES.
Please note: each time a drink is started, the machine will take into account the settings of the last drink made.
To obtain a good quality foam, we recommend using recently opened fresh, pasteurised or UHT (4-5°C). Raw milk will
not produce optimal results.
Steps involved in making the drink:
- Preheating the machine: at any time during this phase, you may set the volume of milk using the + and - keys
- Milk frothing phase
- Coffee flow: at any time during this phase, you may set the volume of coffee using the + and - keys.
26
(11) until the
pictogram is displayed.
to go to the setting of the recipe volume.
using the + or –
to next go to the setting of the number of cup(s).
using the + or – keys
(15).
and set the desired temperature level using the keys

PREPARING A CAPPUCCINO

. (12)
keys (13).
(14).
.
.
once to select favourite A
using
then,
.
or twice to